WATER & ENVIRONMENTAL
MERCURY ANALYZER
- Simple to operate.
- Rugged/Versatile design for laboratory and field.
- Ultra-low detection limit and highest selectivity
- Real-time operation mode for air and gases.
- Direct determination of mercury in liquid and solid matrices within 60 seconds (attachments required). No sample preparation, no use of hazardous chemicals or bottled gases
- Built-in performance verification test cell and auto zero function
- Wide dynamic measuring range (four orders of magnitude)
- Controlled by a keypad or a computer via USB interface
- Data logger for 122 hours of data acquisition, averaging, and storage
- Rechargeable battery for up to 12 hours’ operation
- Sample weigh: 10-500 mg
- Upper limit of the measurement ranges of concentration for a 20 mg sample: 200 mg/kg
- Time for one measurement with air pumping rate: 1 l/m; 1-5 min
- Size and weight of analyser: 470x210x110 mm, 7.5 kg
AUTOCLAVES
- Chamber Material Polished SUS304 medical stainless steel.
- Max. Pressure 0.3MPa
- Rated Working Pressure 0.22MPa
- Max. Temperature 150°C
- Working Temp. Range 105-134°C
- Temp. Accuracy ±0.1°C
- Timing Range 0~999 min
- Dynamic Pulse Exhaust Time 0~9 times
- Water Requirement Distilled water or demineralized water
- Standard Accessories Stainless steel basket, 1pc
MICROBIAL AIR SAMPLER
- Sampling head port flow rate: 0.38m/s, basically same with clean room wind speed (isokinetic sampling)
- Automatic control sample volume: 10 ~ 6000L, minimum unit:10L
- Parameter settings and sampling records storage: 99 sampling parameters
- Setting record; 2000 sample data records.
- Applicable Petri dish: Φ 70 ~ 90 × 15 mm
WATER PURIFICATION SYSTEM
- Pure water outlet High pure, Ultra-pure water
- Power on, program, inlet rinse, producing, full, circle, regular outlet, disinfection, consumables replacing reminder
- Water source required Ro water
- DI water.5-45C,1atm
- Post active carbon filter×+1Mixed bed resin cartridge×+1Ultra pure polishing resin cartridge× +4
- 0.2μm terminal filter×1
- +Double wavelength (254&185 nm)UV cartridge×5000+1 Do
MERCURY MONITORS
- Direct continuous measurements
- Low detection limit and wide range of measurement
- Highest selectivity
- No chemicals, no carrier, and zero gases
- Stable calibration
- Automatic zero drift and span drift correction
- Automatic recalculation to standard conditions
- Auto control and preventive maintenance functions
- Robustness and low maintenance
- Customized operation parameters and communication protocol
- Air flow rate: 7–10 L/min
- Air temperature: -20 to +40 °C
- Number of sampling points: 2 – 16
- Sampling line: up to 150 m
BENZENE ANALYZER
- Simple to operate, fully automated, self-validating analyzer
- Real-time operation mode
- Low detection limit and high selectivity
- Built-in test cell and auto zero function
- Wide dynamic measuring range
- Controlled by a keypad or a computer via USB interface
- Data logger for 122 hours of data acquisition, averaging, and storage
- Rugged/Versatile design for indoor and field applications
- Rechargeable battery for up to 12 hours of operation
- Measurement range:0.1 – 500 mg/m3
- Averaging interval: 1 s – 5 min
- Zero drift correction: Automatic
- Air flow rate: 7–10 lpm
BOD ANALYZER
- Measurement range：0-4000mg/L
- Measurement Accuracy：≤±10%
- Number of tests：1-6
- Data Storage: 10000sets testing data
- Recording interval：5-180mins
- Test days：1-30days
- 7 inch LED touch display
- Operation mode: touch screen man-machine interactive operation
- Printing method：Thermal line printing
COD HEATING BLOCK
- Determination of COD, TOC, total phosphate and total nitrogen
- Temperature range up to 200 deg C
- Timer up to 999 minutes
- Accuracy: ±0.2°C (at 150°C)
- Dimensions: W 189 x H 116 x D 315 mm
- 4 Digital LED of set temperature, set time, process temperature, residual time display
DENSITY METERS
- Measuring method Natural Oscillation type
- Measurement object Liquid sample test materials
- Temperature compensation Up to 10 entries for temperature compensation coefficient and converted temperature
- Automatic calibration All density values of pure water needed for auto calibration can be stored.
- Number of data: 1,100 samples
- External output
DISSOLVED-OXYGEN METERS
- Parameters: Concentration/Saturation/℃
- Range: DO: 0.00～45.00mg/L
- DO Saturation: 0.0～300.0%
- Temperature: -5.0～115.0℃
- Accuracy: DO: ±0.10 mg/L
- DO Saturation: ±2.0%FS
- Temperature: ±0.2℃
- Stability: (±0.07mg/L)/1h
- Response Time: ≤45s（90% respond at 20℃）
- Zero Error: ≤0.10mg/L
- Barometric Pressure Calibration: (77.0~110.0) KPa
- Temp Compensation: Automatic: 0.0～40.0℃
FREE CHLORINE & TOTAL CHLORINE METERS
- free chlorine, total chlorine measurement
- Range: 0 to 3.5mg/L
- Auto range
- Measuring principal: photo meter method
- Light source: LED, 525nm
- Record Max Min Value
- 10PCs free & total powder DPD are included
- Free & total 1.0mg/L standard solution
MANIFOLDS
- Body: Anodized aluminium
- Control valve：Plated copper
- Handle: Anodized aluminium
- Hose barb: Plated copper
- Number of branch： 3
- Filter diameter: Optional
- Funnel capacity: Optional
UV-VIS SPECTROPHOTOMETERS
- Function: Absorbance, Transmittance or Concentration measurements
- Spectral Bandwidth 4nm Wavelength Accuracy ±2nm
- Wavelength Repeatability 0.8nm
- Output USB Port & Parallel Port printer
- WAVELENGTH RANGE (NM)-200-1000.
- TYPE: UV/VIS, vis
PTFE DRY PUMPS
- Free Air Displacement, Comes standard with 115V line cord and convenient power switch
- The economic Model 2019 diaphragm vacuum pump is durable and chemical resistant
- Use Model 2019 for vacuum filtration, desiccation, degassing, and other mid-range vacuum applications
LABORATORY VACUUM PUMPS
- 13l/min,266mbar,90-260V 50/60Hz +AC/DC adapter, Schuko, UK and US plug leads + 12VDC
- Powerful, portable, economical
- Advanced chemical resistance
- Suggested Applications: Vacuum Filtration
- Bring vacuum to where you need it. GEMINI pumps operate on DC power and are readily used with a car adapter or AC adapter. Excellent vacuum for filtration or sampling - 190 torr(266 mbar), 13 l/min. Small, lightweight, portable, includes gauge and vacuum regulator. Polyacrylamide heads, fluoropolymer elastomer diaphragms, tubing, valves
LEADPAINTCHECK STARTUP KIT PHOTOMETER 476 NM
- Direct read parameters: Lead in Paint, Lead in Water, Lead in Soil, Mercury in Water, and Cadmium in Water.
- Easy-to-use eXact® Strip/Photometer reagent
- 0.01 ppm (mg/L) precision with no visual color matching required
- Waterproof meter (IP-67) and it floats
- Automatic test timer & 120 test memory (saves last 20 tests per menu)
- Auto calibrated meter
COLORIMETER 2 WAVELENGTHS FOR WATER INSPECTIONS 525NM & 638NM
- Colorimeter 525 & 638 nm
- For water testing by "dry chemistry" method
- Alkalinity 0-200ppm
- Aluminium 0-0.9 ppm
- Ammonia 0-2.3 ppm
- Chlorine -free/total/as NaCl
- Copper 0-11 ppm
- Fluoride 0-1.5 ppm
- Total hardness 0-300 ppm
EXACT CHLORINE - PLUS - KIT 525 NM
- Measurable parameters: Free& total Chlorine 0-11 ppm
- Bromine 0-14 ppm
- Ozone 0.01-9 ppm
- Chlorine dioxide 0-12 ppm
- Peracetic acid 0-9 ppm
- Hydrogen Peroxide 0-3 ppm
- Transmissions 99.9-0.01%T
- High range Chlorine 0-300 ppm
EXACT MICRO 7 KIT 525 NM
- Photometer 525nm tester for chlorine, hardness, pH, alkalinity etc.
- Measurement range: (ppm)
- Free/total Chlorine: 0-11
- High range Cl free:0-300
- Bromine: 0-14
- Alkalinity: 5-300
- Copper: 0.04-8
- Hardness: 1-320
- Total Iron: 0.03-5
- Ozone: 0-11
- 20-teast memory for each menu (160 total)
- Sample volume: 4 ml
SPECTROPHOTOMETER UV-VIS FOR WATER ANALYSIS
- Optimal accuracy with the reference beam: more accurate, less drift, and no need to make a blank measurement every time you start an analysis
- Acquisition system: 2 times faster than previous technologies
- Better ergonomy with a large color screen
- Special mode: the measurements can be done according to the customizable mathematical formulation, integration of additional variables and measurement conditions
- Improvement of the lamp lifetime: up to 4 years on Uviline 9300 and no need to change the lamp for Uviline 9600
- Guaranteed stray light < 1%
AIR QUALITY METERS
- CO2, CO, O2, Humidity, Dew point, Temp. 6 in 1
- CO2 range: 0 to 4,000 ppm x 1 ppm.
- O2 range: 0 to 30.0 % x 0.1 %.
- CO range: 0 to 1,000 ppm x 1 ppm
- Humidity range: 10 to 95 %RH.
- Dew point Temp. and Wet Bulb Temp. measurement.
- Sampling Time: 2 secs to 8 hours 59 min. 59 sec
Get in touch
For full detailed information about our products, please contact us